Glass carving is an artistic technique used for inscription of creative designs as well as symbols. There is a technique known as sand-carving that was developed in the late 19th century and is used for creation of multilevel abrasive etchings on glasses. After etching of the design into the glasses, there is addition of light and shadow details. In considering glass carving Alberta residents should appreciate its uses; creation of gemstone, windows, sculptures and more.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
When the cleaning of the surface is done with, the surface has to get wiped with a soft cloth. This ensures that it is dry. Also very essential is choosing of the right design that will be carved. Stencil is recommended by most professionals of the arts and craft because with it, there are designs that are already existing. Some stencils come with adhesive backing to ensure they completely adhere to the piece.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
What follows is application of masking tape at the stencil edges. This is generally done at the sections where the stencil meets glass. The masking tape helps to protect areas where carving is not needed. Such areas would ruin the design if they came into contact with the cream. The cream is applied onto the form brush, which is then used for evening out the application. The best way to ensure cream covers every section is to monitor the edges and corners closely.
There should be removal of cream from glass every 10 to 20 minutes for every direction. Creams that are in excess are wiped with paper towels. The hands are then washed properly before gloves are removed so that there are no remnants of chemicals.
Majority of people appreciate carved glasses. One is likely to see the carvings in gift shops, glasses and fancy windows. Not many people are involved in the activity, hence it could be very profitable as a business. Most people cherish the sight of the carvings. In fact, it becomes more fun for those that are doing it for fun.
For those that look to do the business of glass carving Alberta offers the perfect environment. One will need to have 3 main things to begin the business; resists, a studio that is well lit and a blast cabinet. With the right marketing, one is bound to benefit greatly.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
When the cleaning of the surface is done with, the surface has to get wiped with a soft cloth. This ensures that it is dry. Also very essential is choosing of the right design that will be carved. Stencil is recommended by most professionals of the arts and craft because with it, there are designs that are already existing. Some stencils come with adhesive backing to ensure they completely adhere to the piece.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
What follows is application of masking tape at the stencil edges. This is generally done at the sections where the stencil meets glass. The masking tape helps to protect areas where carving is not needed. Such areas would ruin the design if they came into contact with the cream. The cream is applied onto the form brush, which is then used for evening out the application. The best way to ensure cream covers every section is to monitor the edges and corners closely.
There should be removal of cream from glass every 10 to 20 minutes for every direction. Creams that are in excess are wiped with paper towels. The hands are then washed properly before gloves are removed so that there are no remnants of chemicals.
Majority of people appreciate carved glasses. One is likely to see the carvings in gift shops, glasses and fancy windows. Not many people are involved in the activity, hence it could be very profitable as a business. Most people cherish the sight of the carvings. In fact, it becomes more fun for those that are doing it for fun.
For those that look to do the business of glass carving Alberta offers the perfect environment. One will need to have 3 main things to begin the business; resists, a studio that is well lit and a blast cabinet. With the right marketing, one is bound to benefit greatly.
About the Author:
You can visit the website www.claudegarneaustudio.ca for more helpful information about Procedures Involved In Glass Carving Alberta
No comments:
Post a Comment